Mounting spring loaded battery contacts in the enclosure.

[Zabee.Khan]

Hi All,

I wanted to know how can i mount a spring loaded battery contact in my plastic enclosure?

attached is the type of connector im using.

Should i mount it onto a pcb or not needed.. i wanted to know if i could mount a similar type of connector without using a pcb board.

Thanks,
Zabee

 

[MintJulep]

By following the manufacturer's installation recommendation.

 

[3DDave]

It doesn't simply mount to a pcb, that's how it is connected to allow the battery to function. If you need some other mounting method more information will be required.

 

[EdStainless]

If you need three batteries then by a premade case for holding all 3 with the contacts.
Don't try to roll your own.
[URL unfurl="true"]https://res.cloudinary.com/engineering-com/raw/upload/v1674572105/tips/duckduckgo.com_kzacdh[/url]

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed