MP-5104? With Respect To Rupture Discs

[kacarrol]

Good afternoon,

I was reading through some material and have a rupture disc spec that says to "Manufacture Per MP-5104" (as seen here

http://www.contdisc.com/IM_Uploads/Attatchment_74_P5ULPBR28-1132-8 DISCOS DE RUPTURA.pdf)

but I can't find what this is referring to. Is MP-5104 a standard? A subsection of a standard? Any help would be appreciated.

Regards,
K

 

[MaxPower2k8]

Hi kacarrol,

I work for another Rupture Disc manufacturer (Fike Corp) and am very familiar with all the applicable codes and standards however MP-5104 is not one I have seen. It is most likely an internal procedure from that manufacturer on how to manufacture the disc and holder.

Hope that helps,
Jeff

 

[kacarrol]

Jeff,

I'm glad to hear from someone in the industry that this number is unknown, after no luck with searches on IHS and google I just thought I'd do a sanity check on this forum.

Thank you for your help.

K