MSE WALL 1

[Person1234]

Hi All,

We have an MSE wall that we are trying to replace. The owners want to use the same wall. Do any of you know what type of product this wall could be?

 

[WinelandV]

Well, the holes/grooves in the top of the blocks made me think it was Versa-Lok - the holes were for a plastic pin that would push down into the grooves of the block below.

But your front view showing the height makes me doubt myself. The Versa-Lok blocks I'm familiar with were probably 60ish% taller than what you have there, each one weighing about 80 pounds.

Please note that is a "v" (as in Violin) not a "y".

 

[Person1234]

If it helps the dimensions are 6" high, 12" wide, and 16" long.

 

[WinelandV]

A quick trip out to the Versa-Lok website (scroll up a bit from there to see the block dims) shows my memory being faulty - I thought they were taller, but apparently not.

At any rate, it sure looks like Versa-Lok, standard block, with a weathered finish.



Please note that is a "v" (as in Violin) not a "y".

 

[Person1234]

It does look a lot like it. Thank you!