Multiple NPT threads??

[Riin]

hello everyone, i am having a problem making multiple NPT threads. i try to make points then holes, but the hole option doesn't have NPT.
i try to make a NPT hole and mirror, i'm not able to mirror threads.
i am currently trying to make a part with 200 npt holes and i really don't want to pick each hole one by one.
if anyone knows how to get around this please let me know.
Thanks, Riin

 

[jdhut]

The hole feature doesn't work for NPT threads. To create these you need to extrude-cut a circular sketch with a taper (NPT is 1° 47'). Then select the thread feature and pick the hole. NPT values will show up.

 

[SPEAR]

I use Ifeatures, try the following...

http://www.cbliss.com/inventor/Parts/Plumbing/plumbing.htm

The npt feature is at the bottom - You may need to move the "end of part" to the end in the model tree