Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NACE 0175 1990 revision versus latest

Status
Not open for further replies.

Vikram S

Mechanical
Jan 20, 2021
1
Dear All,

I'm looking at some old asset which was designed to 1990 version code. I need to perform a simple GAP analysis to the latest. Pls. if anyone of you have this version share with me ?

Thank you
 
Replies continue below

Recommended for you

The oldest one that I could find quickly is the 2002.
The 1990 was a very short simple document.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
It is included in the 1990 Book of Standards , pg627 ,( if there is an old persons where you work). The 1990 issue is 20 pages.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor