NACE vs. GP240GH+QT

[adula29]

Can we use GP240GH+QT as Killed carbon steel?
This is selection for pump casing for petroleum industry.

 

I don't know, what does the material standard or norm say about it?

"Everyone is entitled to their own opinions, but they are not entitled to their own facts."

 

[adula29]

GP240GH+QT is EN-10213-2

Chemical composition % of steel GP240GH (1.0619): EN 10213-2007
C Si Mn Ni P S Cr Mo V Cu
0.18 - 0.23 max 0.6 0.5 - 1.2 max 0.4 max 0.03 max 0.02 max 0.3 max 0.12 max 0.03 max 0.3

 

[SJones]

https://www.twi-global.com/technica...ls-made-using-different-deoxidation-practices

Probably the wrong forum for the question. Try posting a closure statement and reposting in Metal & Metallurgy engineering.

Steve Jones
Corrosion Management Consultant

http://www.linkedin.com/in/drstevejones

All answers are personal opinions only and are in no way connected with any employer.

 

Steve and the rest,
There's been a rash of questions posted to incorrect forums recently.
I encourage users to manage their personal forum lists.
IM


"Everyone is entitled to their own opinions, but they are not entitled to their own facts."