NATO hose connections

[Eyke]

Good day:

I have an inquiry to supply 2-1/2" hoses with a NATO 5 65mm water connection. We make 2-1/2" hose assemblies, just not this one.

Does anyone have experience in these and can point me to a spec? I've looked around and can't seem to find anything.

What I need is the thread spec, then I can modify one of our 2-1/2" couplings.

Thanks ever so much in advance.
Eyke

--
Eyke
So long and thanks for all the fish --Douglas Adams (1952-2001)

 

[zeusfaber]

As with all these things, the safest route is to ask the customer to clarify what spec they want to accept against.

In the meantime, you might want to take a look at STANAG 1084 Annex B for the coupling, and STANAG 1234 for the thread.

Both are available from IHS if you're a subscriber, or from your MoD/DoD/BWB, etc (provided you live within a NATO member country).

A.

 

[Eyke]

Thank you zeusfaber. I will look for those specs.

I did inquire and was sent this spec NATO Doc ATP 16(D)MTP 16(D).


--
Eyke
So long and thanks for all the fish --Douglas Adams (1952-2001)