harlequinir
Chemical
- Oct 23, 2003
- 8
I have a 120V (plugs into outlet) "wafer wash" machine (2ft x 3ft) with electronics etc fully enclosed with casters (too roll out for service). When operating, verything is fully sealed (like a dishwasher).
One of our maintenance guys says I need a 3-ft clearance all around per NEC/OSHA.
But I think that applies to exposed/live wires, breaker panels etc -not an enclosed machine.
Any advice would be appreciated.
One of our maintenance guys says I need a 3-ft clearance all around per NEC/OSHA.
But I think that applies to exposed/live wires, breaker panels etc -not an enclosed machine.
Any advice would be appreciated.