Need 3d model of Beck Drive (an elec driven damper actuator)

[ProjectEng99]

Need a 3d model of a Electric damper drive, made by Harold Beck & Sons, model 400. I called them and they have Solidworks models for newer assys but not this one.
Thank you,
Dee

 

[CorBlimeyLimey]

Are the new ones similar to the model 400?
Would it be a relatively simple task to convert new to old?

 

[ProjectEng99]

I don't know. I will check if nothing turns up, thank you

 

[pdybeck]

ProjectEng99,

May I ask what you are using this for? I assume you mean an 11-400 model?

Pete

 

[ProjectEng99]

Using it to drive a 10ft x 10ft metal louver damper.
Yes model 11-408-1800-36-2LS
Thank you
Dee

 

[pdybeck]

There are no models that exist for this drive, but you could model the geometry based on the information given in the manual. You don't need a perfect representation do you? I would imagine a rough shape would suit your purposes. There are outline dimension drawings in the manual that would provide all the info you need.

Pete

 

[ProjectEng99]

No I don't need a perfect model. Yes I have the outline dwgs. Just trying to save time. We're busy on other stuff but will build it ourself.
Thank you,
Dee

 

[pdybeck]

I understand Dee. We do have models available for Group 29 and Group 42 drives. These are the newer models that were referenced in your first post.

Pete

 

[ProjectEng99]

The 29 and 42 aren't very close but thank you for your help.
Dee