Need comments on Aero-tech books? 5

[JQCF1]

Hi All, I have Bruhn, Roark, Peery, Hoerner etc but still need guidance and references for some hand calc structural issues from time-to-time. From variuos forums on Eng-tips I see suggestions for Niu, Flabel and Megson for structures to add to my library. I'd like your astute comments for my dilemma. Basically hand-calc methods since I do not have NASTRAN, Ansys etc available. BTW I usually get good service and prices thru Alibris bookseller. Thanks JQC

 

[arto]

Try the Astronautics Structures Manual:

http://trs.nis.nasa.gov/archive/00000254/

the price is right! ;-)

 

[JQCF1]

Arto, Thanks for providing this great link to the Marshall site and especially this doc. I've downloaded some stuff that will be very useful and I'll hold off spending $$ for anymore text books for now. Thanks again-JQC

 

[RPstress]

I would still invest in Niu's airframe book. And Roark, of course.

 

[AminG]

Arto,

Thank you for the wonderful reference link!!

 

[Sparweb]

Flabel's book also would work as a hand-calculation reference. Even the FBD's are hand drawn! By a good classic draughtsman, too. I like the layout, but I don't need to use it much 'cause I've used Bruhn for too long.

But it would be a LOT easier to start learning with a book like Flabel's, and only then move to Bruhn's or Niu's more in-depth treatments of some topics. But my college prof didn't agree...


Steven Fahey, CET

 

[RustyJohnson]

More good references:

Stress Analysis Manual AFFDL-TR-69-42

Air Force Flight Dynamics Laboratory, Air Force Systems Command, Wright-Patterson Air Force Base

Gene E. Maddux

National Technical Information Service, Springfield, VA 22161
_________________________

NACA Reports

Search

http://naca.larc.nasa.gov/?method=simple

Diagonal Tension

NACA TN-2661 A Summary of Diagonal Tension Part I : Methods of Analysis

http://naca.larc.nasa.gov/reports/1952/naca-tn-2661/

Paul Kuhn, James P. Peterson, L. Ross Levin

NACA TN-2662 Handbook of Structural Stability Part II - Experimental Evidence

http://naca.larc.nasa.gov/reports/1952/naca-tn-2662/

Paul Kuhn, James P. Peterson, L. Ross Levin


Buckling


NACA TN-902 Description of Stress-Strain Curves of Three Parameters

http://www.apesolutions.com/documents/NACA-TN902.pdf

Ramberg & Osgood


NACA TN-3781 Handbook of Structural Stability Part I - Buckling of Flat Plates

http://naca.larc.nasa.gov/digidoc/report/tn/81/NACA-TN-3781.PDF

George Gerard and Herbert Becker

NACA TN-3782 Handbook of Structural Stability Part II - Buckling of Composite Elements

http://naca.larc.nasa.gov/digidoc/report/tn/82/NACA-TN-3782.PDF

George Gerard and Herbert Becker

NACA TN-3783 Handbook of Structural Stability Part III - Buckling of Curved Plates and Shells

http://naca.larc.nasa.gov/reports/1957/naca-tn-3783/

George Gerard and Herbert Becker

NACA TN-3784 Handbook of Structural Stability PartI IV - Failure of Plates and Composite Elements

http://naca.larc.nasa.gov/digidoc/report/tn/84/NACA-TN-3784.PDF

George Gerard

NACA TN-3785 Handbook of Structural Stability Part V – Comp. Strength of Flat Stiffened Panels

http://naca.larc.nasa.gov/digidoc/report/tn/85/NACA-TN-3785.PDF

George Gerard

NACA TN 3786 Handbook of Structural Stability Part VI -Strength of Stiffened Curved Plates and Shells

http://naca.larc.nasa.gov/digidoc/report/tn/86/NACA-TN-3786.PDF

Herbert Becker

_________________________


Product Engineering

Analysis of Lugs and Shear Pins Made of Aluminum and Steel Alloys

F. P. Cozzone, M. A. Melcon and F. M. Hoblit

Product Engineering, Volume 21, Number 5, pages 113-117, May 1950


Developments in the Analysis of Lugs and Shear Pins

M. A. Melcon and F. M. Hoblit

Product Engineering, Volume 24, Number 6, pages 160-170, June 1953
_________________________

 

[RustyJohnson]

Also check out:

Abercrombie Baphoofnik's Listmania Lists ...

on Amazon.com for Aircraft Stress Analysis, Piping Stress Analysis, Composites, Finite Element Analysis, Visual Basic for Applications, Excel Spreadsheets, Linux, Mathematics, Subchapter S Corporation, Newspapers and Magazines, World Travel, Chocolate, Good Gear, Good "Stuff", Guns and Butter, Philosophy, Liberty, Capitalism, Economics ...

http://www.amazon.com/gp/richpub/li...f=pd_ys_homenav_lm/002-3971395-0096817?page=0

Best of luck!

 

[prost]

Rusty Johnson:
good list; unfortunately many of the links are broken
for instance

A summary of diagonal tension Part I : methods of analysis
is now here:

http://naca.central.cranfield.ac.uk/reports/1952/naca-tn-2661.pdf

and part II
A summary of diagonal tension Part II : experimental evidence
is now here:

http://naca.central.cranfield.ac.uk/reports/1952/naca-tn-2662.pdf

the NACA reports search site

http://naca.larc.nasa.gov/?method=simple

is just gone, don't know where. Though many appear to be still free here

http://ntrs.nasa.gov/search.jsp

 

[prost]

We had some trouble with our ftp site, made some changes.
The correct address for the Ramberg-Osgood paper is

http://www.apesolutions.com/spd/public/NACA-TN902.pdf

sorry for the inconvenience

 

[RustyJohnson]

prost,

My apologies.

You got the gist of it ...

Best of luck.

 

[RustyJohnson]

One more time,

Stress Analysis Manual AFFDL-TR-69-42

Air Force Flight Dynamics Laboratory, Air Force Systems Command, Wright-Patterson Air Force Base

Gene E. Maddux

National Technical Information Service, Springfield, VA 22161
_________________________

NACA Reports

Search

http://ntrs.nasa.gov/search.jsp?N=17&Ne=2

Diagonal Tension

NACA TN-2661 A Summary of Diagonal Tension Part I : Methods of Analysis

http://ntrs.nasa.gov/search.jsp?R=3...l&Ntx=mode%20matchall&N=17&Ns=HarvestDate%7c1

Paul Kuhn, James P. Peterson, L. Ross Levin

NACA TN-2662 Handbook of Structural Stability Part II - Experimental Evidence

http://ntrs.nasa.gov/search.jsp?R=6...ll&Ntx=mode%20matchall&N=0&Ns=HarvestDate%7c1

Paul Kuhn, James P. Peterson, L. Ross Levin



Buckling

NACA TN-902 Description of Stress-Strain Curves of Three Parameters

http://ntrs.larc.nasa.gov/search.js...&Ntx=mode%20matchall&N=203&Ns=HarvestDate%7c1

Ramberg & Osgood


NACA TN-3781 Handbook of Structural Stability Part I - Buckling of Flat Plates

http://ntrs.nasa.gov/search.jsp?R=5...ll&Ntx=mode%20matchall&N=0&Ns=HarvestDate%7c1

George Gerard and Herbert Becker

NACA TN-3782 Handbook of Structural Stability Part II - Buckling of Composite Elements

http://ntrs.nasa.gov/search.jsp?R=7...ll&Ntx=mode%20matchall&N=0&Ns=HarvestDate%7c1

George Gerard and Herbert Becker

NACA TN-3783 Handbook of Structural Stability Part III - Buckling of Curved Plates and Shells

http://ntrs.nasa.gov/search.jsp?R=3...ll&Ntx=mode%20matchall&N=0&Ns=HarvestDate%7c1

George Gerard and Herbert Becker

NACA TN-3784 Handbook of Structural Stability PartI IV - Failure of Plates and Composite Elements

http://ntrs.nasa.gov/search.jsp?R=7...ll&Ntx=mode%20matchall&N=0&Ns=HarvestDate%7c1

George Gerard

NACA TN-3785 Handbook of Structural Stability Part V – Comp. Strength of Flat Stiffened Panels

http://ntrs.nasa.gov/search.jsp?R=2...ll&Ntx=mode%20matchall&N=0&Ns=HarvestDate%7c1

George Gerard

NACA TN 3786 Handbook of Structural Stability Part VI -Strength of Stiffened Curved Plates and Shells

http://ntrs.nasa.gov/search.jsp?R=8...ll&Ntx=mode%20matchall&N=0&Ns=HarvestDate%7c1

Herbert Becker

_________________________


Product Engineering

Analysis of Lugs and Shear Pins Made of Aluminum and Steel Alloys

F. P. Cozzone, M. A. Melcon and F. M. Hoblit

Product Engineering, Volume 21, Number 5, pages 113-117, May 1950


Developments in the Analysis of Lugs and Shear Pins

M. A. Melcon and F. M. Hoblit

Product Engineering, Volume 24, Number 6, pages 160-170, June 1953

 

[RustyJohnson]

A short list of good books ...

Engineering

Analysis and Design of Flight Vehicle Structures Elmer F. Bruhn

Aircraft Structures, First Edition David J. Peery

Stresses in Aircraft and Shell Structures Paul Kuhn

Advanced Mechanics of Materials Fred Seely and James Smith

Airplane Structures A.S. Niles and J.S. Newell

Theory of Plates Stephen Timoshenko

Theory of Elastic Stability Stephen Timoshenko

A Supplement to Analysis and Design of Flight Vehicle Structures William F. McCombs

Engineering Column Analysis – The Analysis of Compression Members William F. McCombs

Weight-Strength Analysis of Aircraft Structures Francis R. Shanley

Strength of Materials Francis R. Shanley

Mechanics of Materials Francis R. Shanley

Mechanics of Materials Gere and Timoshenko

Advanced Mechanics of Materials Stephen Timoshenko

Advanced Mechanics of Materials A.P. Boresi, R.J. Schmidt

Fundamentals of Aircraft Design Leland Nicolai

Helicopter Performance, Stability, and Control Raymond W. Prouty

Aerodynamics of the Helicopter Alfred Gessow, Garry Myers Jr.

MSC/NASTRAN Primer, Static and Normal Modes Analysis H.G. Schaeffer

Introduction to Flight John D. Anderson, Jr.

Fundamentals of Aerodynamics John D. Anderson, Jr.

Computational Fluid Dynamics John D. Anderson, Jr.

Excel 2003 Power Programming with VBA John Walkenbach

Excel 2003 Formulas John Walkenbach

UNIX in a Nutshell Arnold Robbins

The VNR Concise Encyclopedia of Mathematics Gellert/Kustner/Hellwich/Kastner


Composite Materials

Mechanics of Composite Materials Robert M. Jones

Mechanics of Composite Structures László P. Kollár

Design and Manufacture of Composite Structures Geoff Eckold

Primer on Composite Materials Analysis John C. Halpin

Principles of Composite Material Mechanics Ronald F. Gibson

Mechanics of Composite Materials Autar K. Kaw

Composite Airframe Structures Michael C. Y. Niu

Honeycomb Sandwich Design Technology Hexcel Composites

See TSB124 and TSB120.

http://www.hexcel.com/NR/rdonlyres/...B3-7EFF685966D2/0/7586_HexWeb_Sand_Design.pdf

Honeycomb Sandwich Design Technology references:

Honeycomb Technology: Materials, Design, Manufacturing, Applications and Testing by Tom Bitzer

An Introduction to Sandwich Construction by D. Zenkert



Piping Stress Analysis

Introduction to Pipe Stress Analysis Sockalingam (Sam) Kannappan

Piping Stress Handbook Victor Helguero

Piping and Pipe Support Systems P.R. Smith and T.J. Van Laan

Practical Guide to ASME B31.3: Process Piping Glynn Woods & Roy Baguley

Flow of Fluids Through Valves, Fittings and Pipe Crane Technical Paper 410

Design of Piping Systems M. W. Kellogg Company

Piping Design and Engineering Bluebook Anvil International

(formerly Piping Design and Engineering by Grinnell, Inc)

Best of luck.

 

[freckle]

BTW:
The Astronautics Structures Manual can currently be found at:

http://ntrs.nasa.gov/search.jsp

 

[taoofeng]

Rusty -
As long as you're listing all the NACA Handbook of Structural Stability books, add in Part VII:

Strength of Thin-wing Construction
NASA TN D-162

http://ntrs.nasa.gov/search.jsp?N=0&Ntk=all&Ntx=mode matchall&Ntt=D-162

Author(s): Gerard, George; Becker, Herbert