Feb 26, 2006 #1 HXLIU Mechanical Dec 5, 2005 6 We have a OSBL sub-project of pumping seawater via CS pipeline. I want to know a safty and pratical method for lining and/or coating.
We have a OSBL sub-project of pumping seawater via CS pipeline. I want to know a safty and pratical method for lining and/or coating.
Feb 27, 2006 #2 dicksewerrat Civil/Environmental May 16, 2002 1,946 What kind of Q's and pressures? Richard A. Cornelius, P.E. http://WWW.amlinereast.com Upvote 0 Downvote
Feb 27, 2006 Thread starter #3 HXLIU Mechanical Dec 5, 2005 6 Thanks a lot! The flowrate is 27000m3/h, the design pressure is 0.6 MPa. Upvote 0 Downvote
Feb 28, 2006 #4 civilperson Structural Jan 13, 2006 2,399 Coal tar epoxy lining will work in this application. The thicker the coating, the longer the survival of the pipe. Upvote 0 Downvote
Coal tar epoxy lining will work in this application. The thicker the coating, the longer the survival of the pipe.
Feb 28, 2006 #5 dicksewerrat Civil/Environmental May 16, 2002 1,946 Have you looked at GRP or HDPE? Richard A. Cornelius, P.E. http://WWW.amlinereast.com Upvote 0 Downvote
Mar 14, 2006 #6 Robfitter Specifier/Regulator Feb 14, 2006 4 You should be okay with coal-tar epoxy, how long a run is it? The other thing might be to slipline it with HDPE. Upvote 0 Downvote
You should be okay with coal-tar epoxy, how long a run is it? The other thing might be to slipline it with HDPE.
