Need help locationg Aermet 100 6.0dia x 82 long

[triumph406]

Hi all,

I'm looking for Aermet 100, 6in dia bar x 82in long. Our normal supplier Fry's doesnt have any, and apparently will not be getting any soon.

Does anybody know a supplier, in any state who might have such a piece? Even 2 pieces 41 in long would work.

Even Aermt 310 might work.

Thanks for any help anybody can provide!

Dave

 

[unclesyd]

I would contact Carpenter with your requirement. The largest I've seen used was 2".

http://www.cartech.com/ssalloysprod.aspx?id=2412&terms=*aermet+100*

 

[TVP]

I agree with unclesyd, you need to contact Cartech directly. I doubt any stockists/service centers are going to have 6" diameter bars of Aermet collecting dust on a shelf...

 

[triumph406]

Frys steel did stock upto 6.0 dia bar, but now stock only sizes upto 3.0 dia. Apparently I need to buy 8000# to be able to get the dia I want.

Even alternates like Vasco 250/300 are getting hard to obtain right now.

thanks for the replies

Dave