Hello engineers, I'm a carpenter in Saskatchewan Canada, I have and idea for a product that I believe will take off . I know what I need and just don't know where to begin. Looking for a little advice and guidance on how to design a specialty clip that holds my product together. For more exact details I would ask you to sign a confidentiality agreement before I tell you about the product and idea as a whole. Willing to help anyway I can!
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need help making a prototype for a product id like to make.
- Thread starter Daniel C
- Start date
MikeHalloran
Mechanical
For starters, make a few prototypes out of wood.
When you've got those pretty good, try a few in a bulk plastic like nylon, which you can work with (sharp) woodworking tools.
Mike Halloran
Corinth, NY, USA
When you've got those pretty good, try a few in a bulk plastic like nylon, which you can work with (sharp) woodworking tools.
Mike Halloran
Corinth, NY, USA
MacGyverS2000
Electrical
If you want any useful help from people on a forum, you'll have to give up the silly idea of a confidentiality agreement (i.e., NDA). Unless you intend to pay for that advice... but I have a feeling you'll find your clip idea is unlikely to be original.
Dan - Owner
Dan - Owner
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question