Need help on ETAP Star view! 1

[sysy]

Hi people, i am a student and is new to ETAP and also have basic skills on electrical system.(am using ETAP 12.6.0) I am assigned to do a project on developing a protection scheme that will keep electrical power system stable by isolating the faulted parts from the rest of the electrical network. I am therefore required to use ETAP star to design protective solutions for the power system.

I have gone through the Load Flow analysis and Short-Circuit analysis but i have no clue about Star Protective device Coordination.

Is there any easy to digest tips or guides for me to start my project?

Your help would be greatly appreciated![highlight #CC0000]Thanks![/highlight]

 

[jghrist]

Is your problem knowing how to use the software or knowing how to do protective coordination?

 

[sysy]

Hi! thanks for noticing me, my problem is knowing how to do protective coordination with a suitable circuit which i couldn't come up with. Thank you for approaching me

 

[LDKGR]

Hi sysy,

first of all visit this site :

http://etap.com/protective-device-coordination/protective-device-coordination.htm

 

[sysy]

Hi LDKGR! i visited it awhile ago, i wanted to watch the videos but i'm at school now and ActiveX Content is blocked under my school policy so i cannot watch the tutorials until i get home haha thanks anyways! i will watch it later when i get home

Meanwhile, do you have any link to good single line diagram that i can use for practicing?

 

[LDKGR]

Hi sysy,

you can also visit

http://etap.com/training/tutorials-training-videos.htm.

I believe that it will be enough for you.
For more information you need the official support.

 

[sysy]

Thanks a lot! i will check it out

 

[sysy]

Hi, may i know what does this means? i have no idea how to get through it or am i doing something wrongly?

 

[LDKGR]

Hi sysy,

you have already created 5 star presentations. Erase one to create a new.

 

[sysy]

Hi LDKGR,

Thanks a lot!