Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need Specs. on...

Status
Not open for further replies.

drk

Aerospace
May 20, 2002
3
Talk about reverse engineering. I have been given an old proto-typed circuit with (what appear to be) obsolete components. If anyone has any information on these amps I would greatly appreciate it.

Avantek "Avanpak" AFT4233 M509 8807
Avantek "Avanpak" AFT4233 M510 8807
I assume the 8807 is a date code. These units each have a different gain, so therefore I assume the M509 & M510 are the Part#'s or one lost gain.

TIA,

drk
 
Replies continue below

Recommended for you

Thanks designchain! The "webmaster" had the information I needed and he even worked on the items.

I had looked everywhere for info. on Avantek, I'm curious how you found the website ? (which search engine, etc).


Regards,

drk
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor