Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need welding proceduer for welding TANTALUM (GTAW)
- Thread starter moeman45
- Start date
What will you be welding? What process are you using?
Tantalum is usually welded via resistance welding or with a GTAW process in a vacuum chamber. Helium or argon/helium mixes are common. No filler is typically used.
If you do a search on welding tantalum or refractory metals in general, it'll get you in the ballpark.
Tantalum is usually welded via resistance welding or with a GTAW process in a vacuum chamber. Helium or argon/helium mixes are common. No filler is typically used.
If you do a search on welding tantalum or refractory metals in general, it'll get you in the ballpark.
- Status
Similar threads
- Locked
- Question