Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

New Minix winglet patented by Christian Hugues

Status
Not open for further replies.

aerodolphin

New member
Oct 23, 2002
2
0
0
PT
Can anyone tell me more information about this new winglet?
Where can I find more information about?

" Minix works on the principle that the vortex will hit the wing at exactly the same distance from its tip as the measurement of thickness of the wing. It is designed to allow the vortex to escape through slits in its tube-like body as pressure increases. The result, the vortex dissipates into a linear flow through an opening at the back of the winglet.

“This is the first time anyone has discovered how to create a linear flow which destroys the vortex,” says Hugues. “Often an innovation seems really simple once it has been discovered. In the end, the results count.” "
in Flight Daily News
 
From personal experience some of the origin winglet work was done by Dr. Konig at Mississippi State University (I worked in the wind tunnel during my sophomore year). If need be he would take calls from anyone with this sort of question. He was always helpful as a professor. I'm not sure of his phone number but if you call the campus I know they'd hook you up if he's still around.

Regards,
Mike
 
Aerodolphin,

The Minix Web-Site can be found via the following link: in both English and French.

Rikman

If Beethoven had been killed in a plane crash at the age of 22, it would have changed the history of music...
and of aviation.
 
Status
Not open for further replies.
Back
Top