Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NFPA 13R underground pressure testing

Status
Not open for further replies.

mstrfenix

Mechanical
Mar 11, 2009
6
I know that for a 13R sprinkler system the underground supply has to be pressure tested for 2 hours, however in the 2007 edition of NFPA 13R I can't find where it states that. In section 6.4.2 it talks about testing the aboveground piping, but omits the underground supply and I can't find it any place else in the standard. It might be in the IFC, but I can't find it.
I thought there used to be a catch-all that stated that if it wasn't addessed in 13R you reverted to 13, but alas I can't find that either, figures huh?
I'm sure its right in front of me. Any ideas?

thanks
 
Replies continue below

Recommended for you

BTW - "suppression professionals" as used above refers to fire service suppression personnel not fire protection firm professionals, just in case!

"Fire suppression is a failure in prevention"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor