Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Normalizing Time&Temp. for X65 Steel?
- Thread starter khameneh
- Start date
The austenitising temperature would be around 925 deg C. However, the holding time at temperature of ~30 minutes may lead to some grain growth and de-carburisation unless you have very good control over furnace atmosphere.
There would be loss of strength since mechanical properties are achieved by quenching and tempering.
There would be loss of strength since mechanical properties are achieved by quenching and tempering.
- Status
Similar threads
