Note to follow a curve 2

[dabear007]

Is there a way to get UG NX2 notes to follow a curve in drafting?

 

[Erland]

If you mean the text curving as a curve and not just following curve position, then no.



Erland R. Nielsen
Denmark

 

[Xwheelguy]

...at least not without a GRIP license or GRIP program. You can also look into Wiedemann Engineering's True Type UG (

http://www.w-eng.de).

It costs roughly $1000 for one license of True Type UG. It CAN place text along a curve, but it uses True Type fonts.

Hope this helps.

Tim Flater
Senior Designer
Enkei America, Inc.

http://www.enkei.com

 

[rghay]

I thought there was an old grip program that would do this. I'll try to find it in my notes.

Question would be, will it still work if I find it?

 

[Xwheelguy]

There used to be one in the International GRIP library and it was called O-text (kinda why I mentioned GRIP program to begin with).

I can probably get my hands on it, but here's the link to it. Not sure if the link will work unless you're a member of PLM World:

http://grip.plmworldgroups.org/

Again, it's called O-text.

Tim Flater
Senior Designer
Enkei America, Inc.

http://www.enkei.com