Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nozzle sizes 2B, 3B on ASME Sec VIII Div 1 Vessel (16" Pipe Shell) 1

Status
Not open for further replies.
tankSnvessels

tankSnvessels

Mechanical
Oct 16, 2015
11
Dear Forum members,
I came across a vessel Input data from client. Client has marked 2B and 3B as nozzle sizes. I believe these are 2NPS and 2NPS nozzles. But any references of these are most welcome please.
I came across a mute thread also, but no one has posted what was the result later.
thread794-107714
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Polite Email to the client works.

"Please clarify your marked letters "2B" and "3B" on drawing ABCD-1234/Rev-2 on Dec 20 2015."
 
Upvote 0 Downvote
Dear racookpe1978,
Thanks for the advise. I was looking for some technical reference. It may be just the size, 2NPS and 3NPS and I am using those, but would like to know why people use this, on what basis? Thanks again.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

m_ridzon
  • Question
ASME Sec. VIII, Div. 1 - Ellipsoidal Head 2
Replies
9
Views
3K
TGS4
TGS4
RVAmeche
  • Locked
  • Question
ASME Section VIII Div 1 Nozzle Loads 8
2
Replies
25
Views
680
RVAmeche
RVAmeche
kremenco
  • Question
Query regarding rings in cold stretched vessels as per Appendix-44 of ASME Sec VIII Div-1
Replies
2
Views
780
kremenco
kremenco
Ing. Aponte
  • Locked
  • Question
ASME VIII div. 1 - Weld efficiencies 1
Replies
3
Views
295
SnTMan
SnTMan
HungM
  • Locked
  • Question
2:1 Head straight flange in SEC. VIII, DIV. 1 1
Replies
19
Views
380
gnc89
gnc89

Part and Inventory Search

Sponsor

Back
Top Bottom