NVIDIA QUADRO & NX8 DISCONNECT 2

[TomMtz]

Hi

Today I updated windows XP to Windows 7, 64 bits, the problem is that when the PC was formated the connection with the graphic card is loose.
Some of you know, how can I connect again the graphic card for using with NX8?
I send the product specs.
NVIDIA QUADRO FX 1800 768 MB IRQ 16 and BUS PCI Express x16 Gen 2

Thanks in advance

Tom

NX 8.0.0.25

 

[JohnRBaker]

Why don't you simply upload and install the latest certified graphics driver?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[TomMtz]

John

OK, let me try

Thanks

Tom

NX 8.0.0.25

 

[looslib]

The machine needs 64bit graphics drivers.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[TomMtz]

Hi

All your comments were correct, I only updated drivers.

Best regards

Tom

NX 8.0.0.25