Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in

NX Post Builder make the coordinate output G01X.25Y-.573 become G01X0.25Y-0.573

Status
Not open for further replies.
nxexplorer

nxexplorer

Mechanical
Jun 23, 2010
84
0
0
ID
Hello All,
I need help with the existing NC Code output with NX Post Builder. It is on how to make the coordinate output G01X.25Y-.573 become G01X0.25Y-0.573
Any suggest so much appreciated.

Best Regards,
Maryadi
 
Status
Not open for further replies.

Similar threads

Jian Wang
  • Locked
  • Question
Export points coordinate from NX to txt
Replies
4
Views
11
Jian Wang
Jian Wang
jopek323
  • Locked
  • Question
NX Post Builder Rotary AUTOCLAMP
Replies
0
Views
6
jopek323
jopek323
orlandoa11
  • Locked
  • Question
NX point coordinates as properties
Replies
0
Views
9
orlandoa11
orlandoa11
Asieros
  • Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
16
Asieros
Asieros
DDerek
  • Locked
  • Question
How to make "Balloon" Result in only the number for the callout
Replies
3
Views
7
SDETERS
SDETERS
Back
Top