NX6, postbuilder, lathe, spindle output

[Jaydenn]

Hi guys,

I am working on my very first lathe post and I am having major difficulties.

The post will not output any spindle commands unless it is at a tool change. Even if an operation has a completly different cutting speed, it ignores it.

Even if I just use a non modified, generic postbuilder post, it will NOT output spindle commands.

this is incredibly frustrating. The post contains a custom command called "mom_OUTPUT_SPINDLE" and it appears to be what I need, but even if I place the event into every possible location in postbuilder, I still get nothing output.

Am I missing something? is there a tickbox in NX that I need to select to output the spindle?

BTW, I want CSS output, not RPM.

Any help is appreciated

Jay

 

[JohnVincent]

If you place "#" signs where I show them in my attachment and place the command under "First_Move" it should work. Let me know.

 

[cadcamnx]

friend !!!!!

which his type around
if you can send me the post I fix for you
it's not hard to post and send me a sample file your
my e-mail and andrenxcam@yahoo.com.br
Andre ...

specialist and multi axis
development of IS & V
and postprocessors
member committee nxcam plm world

 

[Jaydenn]

John,
It worked like a charm.


Jay