NX7.5 - ASSEMBLY 1

[CAD2015]

Hi,

I have a drawing (please, see the attached picture).
The component (collector) of this file is not visible and its display in Assembly Navigation is different (it has drawing symbol).
I have never seen something like this yet.......!
Sorry for my ignorance in this matter; could somebody explain me what is all about?


MZ7DYJ

 

[CAD2015]

Here's the NX drawing file.......

MZ7DYJ

 

[CAD2015]

...and the NX component file.
As I specified, if you go i the modeling environment of the drawing file, you'll see that the component doesn't show up!....

MZ7DYJ

 

[cowski]

The icon you are seeing (first post pic) means that you added a view from a different part. That part will not show up in your assembly because it isn't there.

In the NX help files, search for "add a view from a different part"

http://files.engineering.com/getfil...e3e-4863-be6e-6fb215381de6&file=base_view.png

www.nxjournaling.com

 

[CAD2015]

Thanks a lot, Cowski!
I didn't do any kind of modification to the drawing file.
I've just opened it and found out the issue that makes the subject of this thread!
Still, I do not understand how come the component doesn't show up in the modeling environment of the drawing file!
It has the proper references set, etc.! How is possible to bring a component in an assembly without having it visible?........................



MZ7DYJ

 

[CAD2015]

Cowski,
I got it! Thanks a lot!

MZ7DYJ

 

[cowski]

The component is not technically in your assembly. A view has been added of another part, not the component/part itself.

www.nxjournaling.com