NX8.5 Easy Fill 2

[cubalibre000]

Hi,
I'm trying to use the new Mold part validation tool but doesn't work.
Go to Analysis-> Molded part validation-> Easy fill and then Run Flow Analysis but an error came out : "No Flow Analysis application is found"

http://www.youtube.com/watch?v=SS6Atf3XFK4&feature=g-user-u

Thank you...

Using NX 8 and TC9.1

 

[JohnRBaker]

Since this is a new release, we can't emphasize too much that it's critical that you get these sorts of issues reported to GTAC ASAP!!!

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[Arkance/PhoeNX]

You need to download the Moldwizard zip from the GTAC FTP Site.
In that zip file should be the moldex3d folder which needs to be copied to ...\Siemens\NX8.5\Moldwizard
I have tested and as long as you have a Moldwizard license, it should work.


Anthony Galante
Technical Resource Coordinator

NX4.0.4MP10, NX5.0.6, NX6.0.5, NX7.0.1, NX7.5.0-> NX7.5.5 & NX8.0.0 -> NX8.0.2, NX8.5p21

 

[cubalibre000]

Hi namdaci45 ,
thank you for your suggestion, but doesn't work, maybe some packages installed in my machine are in conflict to the package that Moldex need.
I will report to GTAC.


Thank you...

Using NX 8 and TC9.1