NX9 - Body Coordinate Balloons

[Kenja824]

In what is called the KBTD Tool Kit, we have something called Body Coordinate Balloons. You click the button, click on a point/center of circle, corner etc.. in the drafting view, and you can then click on the drawing to place a body balloon giving the coordinate in the X, Y or Z direction.

We find that when doing multiple balloons at one time, the second or third balloon we add will automatically give us a dog leg. Even if one is not needed.

Is there some setting that will turn this function off and only add a dog leg if you actually click on the dogleg function to add one?

 

[Xwheelguy]

Is this GM Toolkit related by any chance? I ask because that's a question more than likely aimed at a very specific user base.

Have you tried contacting the GM Helpdesk (GEES)?

Tim Flater
NX Designer
NX 9.0.2.5 Win7 Enterprise x64 SP1
Intel Core i7 2.5GHz 16GB RAM
4GB NVIDIA Quadro K3100M

 

[Kenja824]

It probably is theirs. I will have to try that. Thanks.