Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nx9 Routing - 'Create Linear Path'

Status
Not open for further replies.
icetea73

icetea73

New member
Apr 10, 2013
53
DE
When using 'create linear path' ports don't seem to be selectable as start/end-points. Is this just another bug in the routing application or am I missing some weird logic?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
What version of NX ?
Which Routing application , Electrical or Mechanical ?
Do you have "control point" enabled as snap option ? ( Must to be able to select ports.)

Regards,
Tomas
 
Upvote 0 Downvote
I was missing the snap option. Thank you!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

moog3
  • Locked
  • Question
Grip create new .prt from template?
Replies
6
Views
38
moog3
moog3
Ian Hood
  • Locked
  • Question
Mechanical route - Applying constraints to Linear Path
Replies
0
Views
7
Ian Hood
Ian Hood
esikoglu
  • Locked
  • Question
CreateDeleteEdgeBuilder failing to create surface
Replies
6
Views
28
esikoglu
esikoglu
Dave W
  • Locked
  • Question
Electrical Routing and Deformable
Replies
1
Views
22
jerry1423
jerry1423
jerry1423
  • Locked
  • Question
Move spline points with Mechanical Routing
Replies
2
Views
28
jerry1423
jerry1423

Part and Inventory Search

Sponsor

Back
Top