Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NYC Design Wind Speed

Status
Not open for further replies.

Alexk2

Structural
Jan 6, 2017
7
What wind speed are people using to design in NYC? Is it 98 mph (as stated in the NYC building code) or 116 mph(for category II)? If you are using 98 mph are you using the ASCE 7-10 and AISC 2010 load combinations? If you are using the ASD combinations that take .6WL and the 98mph are you under designing your building? What are other engineers that design in NYC doing? Thanks for the insight.
 
Replies continue below

Recommended for you

You should review the NYC Building Code. It is explicit on the wind speed and which version of ASCE 7 should be used.
 
FROM THE CODE: "Wind loads on every building or structure shall be determined in accordance with Chapter 6 of ASCE 7 (7-05)"
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor