Aug 11, 2003 #1 masihal Civil/Environmental Jul 12, 2002 6 What should be the oil content of treated water from an oil sepeartion plant in a tank farm area?
Aug 12, 2003 #2 saxon Chemical Oct 9, 2002 409 masihal, It depends on the type of process unit installed. I've seen end of pipe requirements running from 250 ppm max. fats/oils/grease to sanitary sewers to less than 3 ppm FOG to surface waters. Hope this helps. saxon Upvote 0 Downvote
masihal, It depends on the type of process unit installed. I've seen end of pipe requirements running from 250 ppm max. fats/oils/grease to sanitary sewers to less than 3 ppm FOG to surface waters. Hope this helps. saxon
Aug 12, 2003 Thread starter #3 masihal Civil/Environmental Jul 12, 2002 6 Thanks saxon, i came across some literature which indicates oil content in petroleum tank farm, is around 3000ppm and that at the outlet is 10ppm. Upvote 0 Downvote
Thanks saxon, i came across some literature which indicates oil content in petroleum tank farm, is around 3000ppm and that at the outlet is 10ppm.
Aug 21, 2003 #4 asesor Civil/Environmental Aug 13, 2003 43 it depends where you plan to discharge, ground or water Upvote 0 Downvote
