Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OMC sterndrive gear trouble

Status
Not open for further replies.

bearisle

Mechanical
Jun 2, 2004
77
0
0
US
I have a boat with a OMC sterndrive. I have gone through 3 sets of gears and have heard of many other similar nightmares with OMC's. I heard they can convert to Volvo Penta. Does anyone have info on this or any other solutions to my problem?
 
Replies continue below

Recommended for you

What model and year is this omc drive leg?
The newer models can be changed over to a volvo leg useing a transom shield adaptor plate supplyed by Volvo.
If it is one of the older models (a large rubber gasket on the transom cut out)than im afraid you are out of luck.
Am curious as to why three gear failures. Is it possable the drive leg gear ratio is not approiate for the application?
Hope this of some help
 
Status
Not open for further replies.
Back
Top