ONE LUG Nutplate P/N BACN10JZ3 1

[sb1786]

Hello All,

I am making a design for an Airbus A310 and would need to install a nutplate P/N NAS1474 or NAS1473 description "NUT, SELF LOCKING, PLATE TWO LUG, CAP, FLOATING".

The issue in the design is that this type of nutplate doesn't satisfy my edge and fastener margin criteria.

I have been told that a "ONE LUG" nutplate exists and this would solve my problem.

After some research I came accross a nutplate P/N BACN10JZ3 which is apperently exactly what I am looking for.

Problems/Questions:

1- Anyone knows how or where I can find a spec sheet for nutplate P/N BACN10JZ3. (I know its a boeing nutplate)

2- Anyone knows if I can find an NAS/NASM/AN/MS equivalent to P/N BACN10JZ3.

3- Anyone know of a better alternate to nutplate P/N NAS1474 that is "ONE LUG" and for which I can get a spec sheet.


Thanks in advance

 

[ewh]

Oddly enough, I was looking through some old boxes in storage the other day for some reference material and came across a 20 year old copy of "The Sucessful Designer" that used to hang on my file cabinet at work. As seemingly true today as it was then.

When the people fear their government, there is tyranny; when the government fears the people, there is liberty. - [small]Thomas Jefferson [/small]

 

[thruthefence]

Could someone post a copy of "The wrath of Abbibarshim" for those of us unfamiliar? I "googled it & the source, NO Joy.

 

[WKTaylor]

thruthefence...

Follow the link in my post (above) on 9 Oct 08 17:55.

Regards, Wil Taylor

 

[thruthefence]

Thanks!

Just last week I was complying with a service bulletin, and a part was referred to by 3 (three) different nomenclatures in a 9 page document.

regards, Steve