Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Online catalogues for fasteners and where to find specific fastener

Status
Not open for further replies.

b0yw0nder

Aerospace
Joined
Oct 12, 2003
Messages
13
Location
US
Specifically, I'm looking for a low profile truss head machine screw void of any provisions for screwdrivers. (low profile of approximately 1-2mm thickness or less)

The shank needs to be semi-threaded at the bottom. Diameter of approximately 2mm.

Does not need to be metric.

I know this may seem like a vauge description, but I'm just peicing it together from descriptions of other types of fasteners.

Anyone that could help find something like this, that would be great.

Also, links to online fastener catalogues would also be very helpful.
 
I should have said I've checked mcmaster carr and spaenaur.

thanks
 
If you want interference fit you can look at HI-Lok. I think the spelling is right. If you just want a standard fastener, It sounds like a Vandal-proof fastesner may work for you. They come in various head configurations other than normal screwdriver heads
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top