All my engineering files I have made over the years were done in MathCAD 7 (my company wouldn't spring for MathCAD, so I bought this version years ago). My new company uses MathCAD 14 and I am unable to open any of my files...anyone have an idea what I can do? PTC's site has proven no help for such an old version.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Opening files from previous version in MathCAD14
- Thread starter bgrant855
- Start date
If you still have M7, You might be able to have M14 and M7 running side by side and copy/paste the stuff over. There is some risk, because that's not guaranteed to not crash one or both programs. M14 tends to be tolerant of M11 stuff being copied over, but M11 is not tolerant of the other direction.
Otherwise, you'll need need someone with M11 to translate.
TTFN
FAQ731-376
Otherwise, you'll need need someone with M11 to translate.
TTFN
FAQ731-376
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question