sunilug
Mechanical
- Oct 30, 2012
- 5
Hi All,
Recent part, we are receiving a lot more request from user community in our organisation to resolve the 'Out of Date' issues for Assembly/Component Drawings.
Have carried out the following operations to fix the out of date issue:
1. Verified all the child components in the assembly if they shows Modified/Out of date status.
2. Ran the 'Update Structure' and Tools-->Update-->Interpart update.
3. aslo, perform the Utilities-->part cleanup.
4. Deleted the View and re-added.
5. Done operation 'Save' for the Drawing.
6. However, issue is very much consist and Sheet 2 always loads up with out of date condition.
Thanks and Regards,
Sunil MS
NX 9.0
Recent part, we are receiving a lot more request from user community in our organisation to resolve the 'Out of Date' issues for Assembly/Component Drawings.
Have carried out the following operations to fix the out of date issue:
1. Verified all the child components in the assembly if they shows Modified/Out of date status.
2. Ran the 'Update Structure' and Tools-->Update-->Interpart update.
3. aslo, perform the Utilities-->part cleanup.
4. Deleted the View and re-added.
5. Done operation 'Save' for the Drawing.
6. However, issue is very much consist and Sheet 2 always loads up with out of date condition.
Thanks and Regards,
Sunil MS
NX 9.0
