Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Overall heat transfer coefficient of Therminoil

Status
Not open for further replies.

Mokonzinabango

Materials
May 18, 2010
3
can some one help me with a typical value for the overall heat transfer coefficient for Therminoil 72 or 66 when used to collect heat from hot flue gas in a steel heat exchanger
 
Replies continue below

Recommended for you

Is this a flue gas ecomomizer with studded tubes? Any enhancement on the gas side? What diameter tubes, what wall thickness?
 
I am looking for a value that i can use to evaluate the size and the cost of the heat exchanger. I have not reached the level of the detail design yet. all i need at the moment is a typical value so that i can use to evaluate the economics and determine if it is worth going for the project.

IRstuff i have not been successful in getting information from the manufactorer.

if you can not find therminoil specificaly a value form any thermal oil will help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor