patelam
Civil/Environmental
- Jan 27, 2022
- 36
I have a 6.5ft long vertical cantilever channel, its top end has fixed support(fully restrained to displace rotate in all 3 directions). At the bottom free end, 1ft(b) x 1ft(d) x 5ft(height) of steel sheet box is attached. The box is attached at its mid-height to the vertical channel.
How do I find the amplification factor resulting from the overlap between natural frequencies of vertical channel and steel box? I just want to understand the process to determine the amplification factor.
How do I find the amplification factor resulting from the overlap between natural frequencies of vertical channel and steel box? I just want to understand the process to determine the amplification factor.