Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Oxygen Corrosion

Status
Not open for further replies.

refiner258

Petroleum
May 19, 2017
22
Anyone who has data (e.g. corrosion rates) on oxygen corrosion due to high dissolved oxygen in boiler feed water?
 
Replies continue below

Recommended for you

EPRI document 1017482 may be useful. Otherwise find someone that has both a DO analyzer and corrosion product monitor.
 
Thank you, MFJewell and metengr. Do you know any other references from API, NACE or ASME regarding this? I cannot see any established corrosion rates as functions of temperature, DO, pressure and velocity.
 
EPRI is where these experts would publish paper since it is power generation focused.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
 
I Andijani, S Turgoose, Prediction of oxygen induced corrosion in industrial waters, Water Science and Technology, Vol 49, (2), 2004, pp 115-120.

Steve Jones
Corrosion Management Consultant


All answers are personal opinions only and are in no way connected with any employer.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor