Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Package type ID

Status
Not open for further replies.

MacGyverS2000

Electrical
Dec 22, 2003
8,504
I've come across an IC package type I can't identify, so help is appreciated. It's similar to a TSSOP-8, but the overall dimensions are smaller (3.1x2.0mm package). The relevant dimensions (in millimeters) are roughly:
Width: 2.2 (3.1 with pins, toe to toe)
Length: 2.0
Height: 0.7
Pitch: 0.5

It's not common for a company to use non-JEDEC listed packages, but not out of the realm of possibility. The markings on this particular one are "MH4", where the '4' is likely a date code, so "MH" is the marking code of interest. But without a proper package type, narrowing down the actual chip is challenging.


Dan - Owner
URL]
 
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor