ValveEngineer123
Mechanical
- Feb 28, 2008
- 22
I am a mechanical engineer (thermo/fluids, process system, component design) that has been assigned some additional duties. I was wondering if any structural or industrial engineers could point me towards some good resources regarding the following topics:
1) Pallet Rack Design: Specifically interested in how to calculate maximum permissible loads per level/per bay for given beam heights/configurations. I already have a copy of the RMI spec, however it appears I am missing some basic information regarding how to calculate forces/moments in the frame supports/uprights/bracing.
2) Workbench Design: I need to design a workbench that has a required capacity of ~10,000 to 20,000 lbs. Typically I would assume that this type of thing would just be 'overdesigned', however since I have little experience in this respect, I'm unsure how to assess whether or not the bench has been adequately overdesigned. Can anyone direct me to resources where I could find the types of evaluations a structure like this would require?
Or perhaps someone could direct me to a forum where this post might be more appropriate?
1) Pallet Rack Design: Specifically interested in how to calculate maximum permissible loads per level/per bay for given beam heights/configurations. I already have a copy of the RMI spec, however it appears I am missing some basic information regarding how to calculate forces/moments in the frame supports/uprights/bracing.
2) Workbench Design: I need to design a workbench that has a required capacity of ~10,000 to 20,000 lbs. Typically I would assume that this type of thing would just be 'overdesigned', however since I have little experience in this respect, I'm unsure how to assess whether or not the bench has been adequately overdesigned. Can anyone direct me to resources where I could find the types of evaluations a structure like this would require?
Or perhaps someone could direct me to a forum where this post might be more appropriate?