Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Paper Calmenson & Co. joist help

Status
Not open for further replies.

joemarch

Structural
Jul 20, 2004
54
Does anybody know where i can get a load table for a Paper Calmenson joist. The joist tag reads (B6022 18 28-8) it spans 28' i need to know the load it can support. thank you
 
Replies continue below

Recommended for you

Your best bet is to try to identify the joist size and type. Then you may get a copy of the Steel Joist Institute manual "75 YEAR MANUAL 1928 - 2003"(I have the previous edition and it is a great source in my library). The label tells me (my humble interpretation) that the joist may be 18 inches deep and 28 feet 8 inches long. I can not decode the other figures. They may be a mark number for the field crew to place them but not sure or may be the joist designation.

You may also contact them at (843) 626-1995 or their fax number is (843) 626-5565 and their web site is
I think they can point you in the right direction.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor