Part Library Checked box

[dbyrne]

Is there an easy way to take a file that we currently have on a library and signify that it has already been checked?

If we copy it to our job and then alter it, we also need it to show up that it was altered. This would keep our check process down to a minimum.

As of right now the checkers are checking every single purchased item even though it hasn't been changed in years.

Any help would be appreciated.

 

[SBaugh]

Look into PDMworks through your VAR.

Regards,

Scott Baugh, CSWP
3DVision Technologies

http://www.3dvisiontech.com

http://www.scottjbaugh.com

faq731-376
faq559-716 - SW Fora Users

 

[ctopher]

That's the way I do it, with PDMW.
If you have SW Professional, it can be done with eDrawings.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site

FAQ559-1100
FAQ559-716

 

[dbyrne]

Thanks guys for the info. We don't have pdmworks but I am curious as to what you meant when you can do it with edrawings.

 

[ctopher]

You can create an eDrawing from any SW file and it can be used for mark-ups and checking.

http://www.edrawingsviewer.com/

You should have it on your PC already.

Chris
Sr. Mechanical Designer, CAD
SolidWorks 05 SP3.1 / PDMWorks 05
ctopher's home site

FAQ559-1100
FAQ559-716