PCM600 - Goose Communication DELETE IED

[Charneira]

Hi people.

I´m working one a project with PCM600. I´m in a end road with one issue. I need to delete a IED name of my IEC61850 configuration project (goose communication), beacause that IED was already deleted from my plant structure, but your "vector name" continue appearing on the horizontal communication.

That situation don´t let me choose that name, in a technical key, in a new creating IED.

Anyone can help me?

Best regards.
Pedro Martins (Portugal)

 

[vijaypandiyan]

Hi,

After you delete IED, did you re start the IEC61850 configuraion tool. That should refresh the IEDs.

-Vijay

 

[Charneira]

Hi Vijay. Yes i just restarted the IEC61850 configuration tool. But the IED name stills there, and i need that name availability to identify techical Key from other IED. download that image

http://files.engineering.com/getfil...4d2b-9c31-4e9d992885a9&file=IED_to_Remove.jpg

 

[ptcabb]

Can you store the PCMP file somewhere? I can have a look at it then.