Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

PE Exam(Structural I)

Status
Not open for further replies.

IGOPUM

Structural
May 14, 2006
3
0
0
US
Hello guys: Do you have any tips/advice for the PE. Someone told not to worry too much about code related material to be the latest. In addition, how long is the reciprocity process?? Thanks in advance
 
Replies continue below

Recommended for you

I took the Structural I in 2003. I would check your state board recommendations this. My state board's web site had a list of recommended books for the exam and in certain instances, newer codes were required.
From the time I submitted all my paperwork for reciprocity, I think it took approximately 6 weeks. This was for Ohio, I'm not sure about other states.
 
Check out ncees.org for exam information. They will tell you what codes are necessary, which edition of said codes, and even have an approximate breakdown of the exam content (i.e., 30% analysis, 20% design, etc.).
 
Status
Not open for further replies.
Back
Top