chemdesign
Chemical
Does anyone have any experience with the performnace of superduplex stainless steels (UNS S32760 or S32750) in caustic solutions (10% NaOH wt) with 1% - 5% sulfides wt. at temperatues around 250 F? Thanks.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Performance of Super Duplex Stainless Steels
- Thread starter chemdesign
- Start date
- Status
EdStainless
Materials
No, I don't have any specific info.
However these alloys do very well in dilute caustic environments. The NaS does not have much impact on corrosion at these lower concentrations.
How are you getting to 250F? Boiling should be about 220F.
Check out the Outokumpu corrosion info on line.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
However these alloys do very well in dilute caustic environments. The NaS does not have much impact on corrosion at these lower concentrations.
How are you getting to 250F? Boiling should be about 220F.
Check out the Outokumpu corrosion info on line.
= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection
- Thread starter
- #3
chemdesign
Chemical
The temperature of 250 F is due to 15 psig pressure.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question