Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Petroleum Contaminated Soil

Status
Not open for further replies.

dirtqueen

Civil/Environmental
Jan 30, 2002
6
0
0
US
NEED HELP. Have 5,000cy of Petroleum Contaminated Soil that I need to remediate. The soil is clay with a HIGH PI, upper end of TEPH is 134,000 mg/kg. How effective and costly would thermal soil treatment process be? How effective and time consuming will landfarming be? Site located near Boulder CO. Are there anyother options out there? Time is a concern. Thanks
 
Replies continue below

Recommended for you

I suggest that talking to a locally based Environmental Consultancy may help (and won't cost anything except time!).

Try one of these URS offices near you:

Colorado
Colorado Springs
9960 Federal Drive
Suite 300
Colorado Springs, CO 80921
Tel: 719.531.0001
Fax: 719.531.0007

Commerce City
LSS Rocky Mountain Arsenal
Environmental Analytical Lab Building #130
Commerce City, CO
80022-1748
Tel: 303.289.0525
Fax: 303.289.0377

Denver
Denver Technological Center
8181 East Tufts Avenue
Denver, CO 80237
Tel: 303.694.2770
Fax: 303.694.3946
303.930.6087

I hope they can help.

Adam Beresford-Browne
URS Dames & Moore
Dublin
Ireland
 
Give this firm a call and visit their website:
They performed a fast-track remediation of petroleum-contaminated soil in upstate New York for me a few years ago, with remarkable success. Soils had high clay content, requiring some drying with lime, etc. Gasoline components were reduced below NYSDEC action levels in short time. Good group of people to work with.


Rockjoint
rockjoint@yahoo.com
 
I need some help, I will be operating a Soiltek soil remediation unit to clean up a petroleum contaminated site, and can't find an operators manual anywhere. Does anyone know where I could find one for this unit or a similar unit? Thanks!
 
Status
Not open for further replies.
Back
Top