Pharmaceutical Engineering Drawing Numbering Standard

[cfernandes]

Was wondering if there is a standard for numbering of engineering drawings that is specific to the pharmaceutical industry?

Any help would be appreciated

Regards

Carl

 

[ludikris]

Carl,

I had six years in the Bio/Pharma industry, but never saw a standard, per se, that everyone adhered to. Even P&ID symbols, although largely ISA, were different among engineering houses.

Are you a consultant/contractor? If you are starting from scratch, I'd follow the end user nomenclature as close as possible.

--
Erik
MO P.E.

 

[MayLing]

Please can anyone advise where I can get hold of equipment datasheet template? I need to generate datasheet for plug flow reactor, heat exchanger, flow meter, pump, pressure and temperature transmitter.

Many thanks for your help.

 

[ludikris]

I'm sure they are out there, but we generated our own.

--
Erik
MO P.E.

 

[MedicineEng]

I agree, we also generate our won datasheets. Eventually over itnernet you will find some examples taht you can get ideas from.