Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Phi factors or resistance factors for grout bond strength

Status
Not open for further replies.

Hrishit Shah

Civil/Environmental
Jan 15, 2021
3
The specs sheet I am looking at for my grout suggests a bond strength of 1500 psi after 28 days. In order to check whether this is good for my factored demand (LRFD), I would like to know what resistance factors can I apply to the bond strength or which code/design manual could I find that in. My demand bond strength is 603 psi, so that allows me to go up to 0.4 (1500/600) phi factor, but anything less than 0.4 will not work.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor