Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Photoworks Brass Settings
- Thread starter tbeck11
- Start date
Yes, unfortunately I don't have acess to them right now. I can post them later. Your talking about cast brass fittings.
Rob Rodriguez CSWP
Eastern Region SWUGN Representative SW 2007 SP 2.0
Rob Rodriguez CSWP
Eastern Region SWUGN Representative SW 2007 SP 2.0
- Thread starter
- #3
That's correct rob!
Thanks for the help. Love the things you do in PhotoWorks! Just starting to get into it.
Todd Becker
R-V Industries
Thanks for the help. Love the things you do in PhotoWorks! Just starting to get into it.
Todd Becker
R-V Industries
Sorry it took so long Todd. You can find the settings at the link below. These are for SW 2008 but should also work for 2007.
Rob Rodriguez CSWP
Eastern Region SWUGN Representative SW 2007 SP 2.0
Rob Rodriguez CSWP
Eastern Region SWUGN Representative SW 2007 SP 2.0
Sorry. Looks liek teh site broke the url up. try this
Rob Rodriguez CSWP
Eastern Region SWUGN Representative SW 2007 SP 2.0
Rob Rodriguez CSWP
Eastern Region SWUGN Representative SW 2007 SP 2.0
CorBlimeyLimey
Mechanical
rockguy ... non of the links (in the attachment box) seem to be working. The last three are pointing to an Eng-Tips directory instead of the Engineering.com server.
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
Hey CBL,
Disregard the first sent of links. The spaces in my url caused the board to post the one link as 4 seperate ones.
The link at the bottom on my post directly above your has 1 link only. That will take you to a PDF page hosted at my website.
Sorry for the confusion.
Rob Rodriguez CSWP
Eastern Region SWUGN Representative SW 2007 SP 2.0
Disregard the first sent of links. The spaces in my url caused the board to post the one link as 4 seperate ones.
The link at the bottom on my post directly above your has 1 link only. That will take you to a PDF page hosted at my website.
Sorry for the confusion.
Rob Rodriguez CSWP
Eastern Region SWUGN Representative SW 2007 SP 2.0
- Status
Similar threads
- Locked
- Question