Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Pigging Xylene based products

Status
Not open for further replies.

Rc2870

Industrial
May 2, 2024
1
A 316 SS piping 2" system needs to have a constant pigging operation. It's producing blended products which xylene is a main ingredient. The pipework is earthed to standards, The pig is a synthetic with a weighted inner. The pig needs to be propelled by a gas but may incur some aerosol effect when passing junctions etc, causing the propellant to have a small amount of xylene mixed into it.

My question is, is air or N my propellant given all Atex considerations are in place?
 
Replies continue below

Recommended for you

You may also consider other hydrocarbons as propellant. Propane and natural gas are both less expensive than nitrogen.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor